Electrical Work That Belongs in a Well-Designed Home
Remodel, lighting and modernization electrical for Orange County homes where the finishes were chosen carefully and the installation has to match them. Planned with your designer, architect or GC — not improvised at rough-in.
- ✓Remodel and custom-home focused
- ✓Lighting layouts planned before drywall
- ✓Clean, protected installations
- ✓CA Lic. #1094900
Electrical Work in Orange County
Whole-Home & Major Remodel Electrical
Full-scope remodel electrical coordinated with the build schedule and the other trades.
Remodel Electrical →Architectural & Indoor Lighting
Layered ambient, task and accent lighting with dimming and switching planned room by room.
Remodel Electrical →Landscape & Outdoor Lighting
Facade, garden and path lighting with zones and controls for outdoor living areas.
Landscape & Outdoor Lighting →Kitchen Electrical
Island power, appliance circuits, under-cabinet and pendant layouts set to the millwork.
Remodel Electrical →Bathroom Electrical
Vanity and mirror lighting, heated floors and fans where specified, GFCI protection throughout.
Remodel Electrical →Panel & Service Modernization
Service capacity brought in line with the finished house instead of the original one.
Panel & Service Upgrades →EV Charging & Dedicated Circuits
Charging and high-demand appliance circuits, sized from a load calculation.
Panel & Service Upgrades →Custom & New-Home Electrical
Ground-up residential electrical from plan review through final inspection.
New Construction Electrical →Smart-Home Wiring Infrastructure
Line-voltage infrastructure, control locations and low-voltage pathways where specified.
Remodel Electrical →Commercial Tenant Improvements
Secondary work — lighting, circuits and service for professional, retail and restaurant spaces.
For Builders & Contractors →
20+ years of electrical experience, applied here
Two decades of residential construction experience is mostly what keeps a remodel clean: knowing where a can light will collide with a truss, and what the tile setter needs from you before the walls close.
- 20+ yrsresidential electrical experience
- Plan-firstlighting and device layout before rough-in
- Coordinatedworks alongside designers, architects and GCs
Orange County Project Record
Orange County work is the same coastal remodel and new-construction scope JIC runs further south. These two completed projects show the standard — comparable property types, comparable electrical.
Coastal open-plan new build
- Property type
- Single-family new construction, vaulted open plan
- Electrical challenge
- Vaulted framing left no attic to run from — the lighting layout had to be final before insulation
- Scope of work
- Service and panel, full rough-in, recessed LED on dimmers, kitchen and island circuits, low-voltage landscape lighting, final trim
- Result
- Passed final inspection; garden and patio lighting zoned off a single transformer
Coastal residence, full electrical
- Property type
- Single-family coastal residence, vaulted living spaces
- Electrical challenge
- Salt air — standard exterior devices and enclosures would not last
- Scope of work
- Complete wiring from service through trim, recessed and pendant layout, full kitchen circuits, mini-split feeds, corrosion-rated exterior devices
- Result
- Passed final; exterior hardware specified for the marine environment
Orange County Coverage
Orange County work is planned rather than dispatched — JIC schedules project days in the county so remodels get continuous crew time instead of a partial visit squeezed between service calls.
Communities served- Newport Beach
- Laguna Beach
- Dana Point
- San Clemente
- Irvine
- Tustin
- Costa Mesa
- Mission Viejo
- Aliso Viejo
- Anaheim
- Santa Ana
- Yorba Linda
Best fit for meaningful upgrades, remodels and planned projects. Send the scope and the target dates and JIC will confirm fit.
Confirm my project location
Remodel & Lighting Questions
Questions that come up specifically on Orange County work.
+Can you coordinate electrical work with my remodel contractor or designer?
Yes, and it works better that way. JIC can join a walkthrough, mark the plan with the designer or GC, and work to the construction schedule so electrical is not the trade holding up drywall.
+Can lighting locations be planned before drywall?
They should be. Fixture locations, beam directions, switch banks and dimming zones get marked at rough-in, while moving a can light still costs nothing.
+Can you add circuits for new kitchen appliances?
Yes. Ranges, ovens, built-in refrigeration, steam and coffee units, and island receptacles each get the dedicated circuit the equipment requires, verified against the panel.
+Can you upgrade electrical capacity during a renovation?
Yes, and a renovation is usually the cheapest time to do it. The load calculation comes first; if the existing service will not carry the finished house, the upgrade is priced with the rest of the work.
+Do you handle landscape and architectural lighting?
Yes — facade, garden, path and outdoor living lighting, including transformer sizing, zones and controls.
+How do you protect finished surfaces during work?
Access is planned around finished material, existing surfaces are covered, and JIC coordinates with the GC on who patches what before anything is opened up.
Plan the Electrical Before It Costs You
Send the scope, the stage of design or construction, and who else is on the project. JIC will tell you what decisions are coming and when they need to be made.
- ✓Best contacted before rough-in
- ✓Works with your designer, architect or GC
- ✓Scoped written estimate from plans or a walkthrough
Call or email for local scheduling
Tell us where the property is and what you need. If it is inside the service area we will give you a realistic window; if it is not, we will say so.
Helpful to mention
- ✓City or ZIP of the property
- ✓What the work involves
- ✓Whether access is gated, occupied or an active jobsite
- ✓Your preferred days or timeframe